Un Panthera à $ 35 ?


Hard to believe but absolutely true – your very own Pipistrel Panthera in time for 2021 for just €35This project has been a long time in the development but finally Eclipson Aeroplanes have released the Panthera model to the public.For €35 you get all of the files to make your own 53 inch wingspan Pipistrel Panthera flying model using 3D printing technology.Watch below on YouTube            
€ 35 download includes…..STL filesG-codes for PLA and LW-PLAScheme designCura profilesModel for Real Flight simulator2 alternatives landing gearsLW-PLA version reinforced with CFRemovable wing and landing gearFull flaperon design 
Panthera Model Specifications
Printed Weight      LW-PLA   380gr      PLA   700gr
Take-off weight     LW-PLA   650gr       PLA   1050gr
Stall speed             LW-PLA   27kmh     PLA   32kmh
Wing loading         LW-PLA   38g/dm²   PLA   61/gr/dm² 
Wing span             1350mm (53″)
Wing surface         17dm2
Wing aspect ration   10
Length                   990mm 
All of the information is on the following link including recommended 3D printers, filament, power system, battery, radio control system and everything else you need along with links to where you can purchase.https://www.eclipson-airplanes.com/panthera

Laisser un commentaire