Hard to believe but absolutely true – your very own Pipistrel Panthera in time for 2021 for just €35This project has been a long time in the development but finally Eclipson Aeroplanes have released the Panthera model to the public.For €35 you get all of the files to make your own 53 inch wingspan Pipistrel Panthera flying model using 3D printing technology.Watch below on YouTube € 35 download includes…..STL filesG-codes for PLA and LW-PLAScheme designCura profilesModel for Real Flight simulator2 alternatives landing gearsLW-PLA version reinforced with CFRemovable wing and landing gearFull flaperon design Panthera Model Specifications Printed Weight LW-PLA 380gr PLA 700gr Take-off weight LW-PLA 650gr PLA 1050gr Stall speed LW-PLA 27kmh PLA 32kmh Wing loading LW-PLA 38g/dm² PLA 61/gr/dm² Wing span 1350mm (53″) Wing surface 17dm2 Wing aspect ration 10 Length 990mm All of the information is on the following link including recommended 3D printers, filament, power system, battery, radio control system and everything else you need along with links to where you can purchase.https://www.eclipson-airplanes.com/panthera |